Analysis of why the printed board is anti-aging
2022-12-12
The printed boards we see are basically very beautiful. Of course, there is also a performance, that is, it can resist aging. With this performance, its life will be very long, and it will not age after a long time of use. It will not affect normal use. Why can this plate resist aging? Let's analyze the reasons below.
1. The anti-aging agent used
It is necessary to use anti-aging agents, and then form a UV layer on the surface of the printed board to further strengthen its function.
2. Construction requirements for anti-aging treatment in the production of endurance boards
During the production process, it is necessary to evenly coat the UV-resistant material on the surface of the endurance board and dissolve it into one with the board surface. In this way, when the eyes are shining intensely, this protective layer can convert short-wave light into long-wave light, and then reduce the damage of ultraviolet rays to the board. The aging of printed boards is largely caused by the harm caused by ultraviolet rays, so once the damage effect of ultraviolet rays on the board is reduced, its anti-aging properties are naturally improved.
3. The influence of equipment on surface construction
Due to the constraints of the equipment, many of them cannot be painted on the surface, especially some equipment. Because of this, when the endurance board is produced, the anti-ultraviolet material can only be doped into the PC material.
Therefore, it is not difficult to see from the above reasons that the printed board can actually resist aging, but it cannot be exposed to ultraviolet rays for a long time because it is good at anti-aging. We still need to do a good job in sun protection.
MORE NEWS
/ Phone